Before you replace the entire window, inspect to see if the difficulty is with the casement home window hardware. You can actually deal with a home window crank in just five easy steps.

You are watching: How to fix manual window crank


*
*
*

Remove the old crank and install the new one: check the old crank for damage

*
*
*
*
*
*

Line increase the new crank v the old holes. The old screw feet are often stripped. If so, rod a toothpick or two in them as filler and also drive the screws. Then reattach the crank arm and also casement cover.

If your home window crank handle simply spins once it's turned, or that can't pull in the sash far enough to connect the lock, opportunities are the gears are stripped and it's time for a new crank mechanism. Instead of the crank mechanism is simple. However finding a new crank might take some time. You can mail her old crank to some replacement hardware specialists and also you'll get back a complement (Photo 1). The cranks deserve to be expensive, however they might be a cheap if the as whole condition of the window is still good.

Start by inspecting the old crank operator and handle for wear. If the this are absent inside the crank handle, just replace it (at home centers and full-service hardware stores). Yet if the operator has broken or worn components (Photo 1), replace the entire operator mechanism.

Your operator may vary contempt from the one us show. However, the replacement process is similar. The first step is come disconnect the crank eight from the overview track. Take the end the screen and crank the home window open until the plastic guide bushing aligns through the overview track notch (Photo 2).

Next, look because that trim mounting screws within the display screen track. Unscrew castle to remove the casement cover and access the crank innards (Photo 4). If there aren't any type of trim screws, the casement sheathe is more than likely nailed or stapled in place. On slide a stubborn putty knife in between the window jamb and casement cover. Very closely pry up the casing so girlfriend don't damages the lumber parts.

See more: Can You Walk Across The Queensboro Bridge Pedestrian Path Now!

Close the home window and lock it till the brand-new crank arrives. To compare the new operator with the old, making certain they match. Install the brand-new crank as displayed in photograph 5.